ZigBit 5.0 Miner
ZigBit 5.0 Miner is a main DLC (direct liquid cooling) mining rig that provides ultimate safety and High Hash Rate Power. ZigBit 5.0 Miner has been designed specifically to be fault tolerant and to eliminate potential risks associated with liquid cooling. ZigBit 5.0 Miner offers all the well-known benefits of liquid cooling without the cost, complexity and risk. The coolant is delivered to the ASIC and manifolds under negative pressure on both the supply and return so coolant cannot leak out; only air can leak into the system. ZigBit 5.0 Miner can be placed or used anywhere, such us Home/Office/Datacenter/etc.
The unit can only mine one Coin at a time with the possibility to switch
Easy to use
The unit will be delivered to the customer already configured, the customer just plug in, enter the pool data and start mining.
Networking connection Mode
RJ45 Ethernet and Wireless
7nm ASIC ZigmaBit BoosterX
120 kg (264 lbs)
Constructed out of steel welded for maximum strength. The units come equipped with casters and leveling feet to allow ease of installation and stabilization.
Pumps and Piping
The water temperature to the mining rig is maintained at a temperature above the dew point in the data center based on a temperature and humidity sensor included in the rig. The temperature in the fluid supply reservoir controlled by a PWM modulated HX pump. Units equipped with a water filtration system with 100 micron filters.
The unit includes a microprocessor controller touch screen display mounted on the front of the unit for user interface. The unit automatically controls the flow through the rig, test the system for leaks, fill, drain and maintain coolant levels. The unit monitors the vacuum, pressure, temperature (pump and facility side), total dissolved solids (TDS), dew point, water levels, and coolant levels
Unit is designed to operate in ambient conditions
F), 0-95%RH (non-condensing),
0-2000m (0-6000ft) elevation.
Linux, ZigmaBit open source software